The issue of the computer getting stuck on scanning and repairing the drive is a common problem that many Windows 10 users encounter. This feature is designed to help the system automatically deal with sudden crashes that can occur due to improper shutdowns, power outages, or other unexpected events. When the system detects that there might be issues with the hard drive, it will automatically start scanning and repairing the drive to fix any errors that it encounters.

Repairing drive is stuck

However, sometimes the scanning and repairing process can get stuck, leaving users unsure of what to do next. This can be frustrating, especially if it happens frequently or if it takes a long time to complete. The good news is that there are several methods that you can use to resolve this issue.

One possible reason why the scanning and repairing process might get stuck is if the computer or laptop was turned off incorrectly. This can occur in several situations, such as when you long press on the power button to force the computer to turn off, when there is an electricity surge or sudden power outage, or when the battery runs out in a laptop.

Why does scanning and repairing of the drive become stuck?

When the hard drive and RAM suddenly turn off, some processes can be damaged and some files can even be deleted. To prevent data loss, the operating system will automatically start scanning and repairing the drive. If everything goes well, after a while the system will boot up normally. However, if the system is unable to cope with the errors that occur, it may freeze, which can make it difficult to determine what to do next.

If you find yourself in this situation, there are several methods that you can try to resolve the issue. The first method is to simply wait for the maximum amount of time. If you have the opportunity, leave the computer alone for a day. Sometimes, after just a few hours, the system will boot without a single error.

Another method you can try is to check all the connections of your PC. If you recently installed a hard drive, make sure it is connected properly. If it is, the error should disappear from your screen.

You can also check the drive status in the Control Panel by opening Security and Maintenance. In the Service section, there is a disk status section where you can look at the status of your hard drive. If it is inactive or damaged, click on the appropriate link and fix it. If it says all disks are working without problems, proceed to the next method.

If the hard drive is in order, you can simply cancel the scanning and repairing process. As soon as the computer starts to boot and the “Preparing for automatic recovery” screen appears, immediately press any key until this screen disappears. This way, your computer will not freeze on automatic recovery. After that, you can run any utility to check and fix the disk. But before doing this, take care of your data, as it may be damaged or deleted during the repair of the disk.

Save your data

If you want to be extra cautious, make a backup or disk image of your data. DiskInternals Partition Recovery is a helpful tool for disk image creation, and any information will remain available to you in the future. The program restores a variety of file formats, up to 1 Pb in size, and is compatible with any version of Windows and the most recognizable file systems. There are also many additional features, including options for the Recovery Wizard, preview at no cost, and several scanning options.